H Bench, Wood Dining Bench in Oak Veneer with Panel Legs, Backless Bench for End of Bed or Entryway, 4 Lengths

$0.00

One bench, three places to put it
The H Bench is a backless bench built from clean, straight lines. Pull it up to the table as a dining bench, set it at the foot of the bed, or park it by the front door for putting on shoes. The seat is 13.8 inches (35 cm) deep, wider than a typical slim bench, so you can sit comfortably without feeling perched, and at 17.7 inches (45 cm) high it lines up with a standard dining table.

Built on panels, not posts
Each end rests on a full wood panel rather than four thin legs, which gives the bench a quieter, less cluttered look and spreads the load more steadily. A single rail runs the full length of the seat, tying the two panels together so nothing shifts when you sit down.

Details you notice up close
A slim gap separates the seat from the leg panels, with a small brushed stainless steel connector bridging the join. The 1 inch (2.5 cm) seat top has laser sealed edges for a clean, even line, and the surfaces are imported North American white oak veneer over multi layer plywood, finished in layered paint that keeps the grain visible.

Surfaces: North American white oak veneer over multi-layer plywood, with white oak solid wood details.
Full panel legs instead of four posts, for a cleaner look and steadier support.
Full-length rail under the seat ties both ends together.
Deep seat: 13.8 in (35 cm).
Seat height: 17.7 in (45 cm), which works with most dining tables.
1 in (2.5 cm) thick seat top. Rounded and smooth sealed edges with no visible glue line, which keeps moisture out and helps the panel resist swelling and warping.

Wipe clean with a soft, dry cloth. Keep away from direct sunlight and excessive moisture to protect the finish.

• All dimensions are measured by hand with a tolerance of ±0.79".
• Images are for reference only. Actual color may vary slightly due to monitor settings and natural variation in wood grain.
• Power: Any product with a cord or a built-in outlet ships with a US plug adapter already fitted, so it works on a standard 120V outlet out of the box. Nothing extra to buy.

01 / DESIGN

A quiet shape that puts the room in order

The bench is pared back to what it needs: clean, straight lines that bring a sense of order to a room along with the warmth of real wood. It reads calm rather than loud, so it never pulls focus from whatever else is in the space. Pull it up to the dining table to seat several people at once, set it at the foot of the bed to hold clothes, or put it by the front door for sitting down to change shoes.

02 / SIZE AND STRUCTURE

A wider seat on a frame that does not move

The seat is 13.8 inches (35 cm) deep, enough to support you properly so you sit relaxed instead of perched on an edge. The top is 1 inch (2.5 cm) thick, substantial enough to resist flexing under weight. A slim gap separates the seat from the leg panels, which lifts the top visually and keeps the whole piece from feeling heavy. Each end rests on a full panel that reaches the floor, and a single rail runs between them to spread the load, so nothing shifts when you sit down.

03 / MATERIALS

Chosen to last, not just to look good on day one

The surfaces are imported North American white oak veneer, with open, natural grain and a warm, fine feel under your hand. The core is multi layer plywood. The selection standard is deliberately strict, balancing how the bench looks against how it is built, so it holds up in a home with kids and pets.

04 / CRAFTSMANSHIP

Finished at the edges, where it shows

The edges are laser sealed, a process that melts a polymer layer and bonds it to the panel without a visible glue line. The result is an edge that feels smooth and rounded under your hand, keeps moisture out, and reduces the risk of the panel swelling or warping over time.